MACD谁都会看，但大部分人只看金叉死叉。问题是——第一次金叉经常是假的，等到第二次、第三次才是真机会。可你怎么知道现在是第几次金叉？
今天这个副图指标，把MACD的所有信号全部标注：1~9次金叉、底背离、顶背离、黄金底、钻石底……不用你自己数，公式帮你数好了。
信号体系拆解
① N次金叉标注：从第一次到第九次金叉，每次都会在副图上标注文字。次数越多，说明底部越扎实——六次金叉=黄金底，七次=白金底，八次=钻石底，九次=金钻底。
② 底背离：价格新低但MACD没有新低，红色标注+连线，经典的反转信号。
③ 顶背离：价格新高但MACD没有新高，绿色标注+连线，经典的见顶信号。
④ 三全底：二次金叉+底背离同时出现，蓝色标注，这是最强的底部组合信号。
⑤ DIFF/DEA变色：DIFF在DEA上方时变白加粗，DEA在上升趋势且DIFF在上方时变黄加粗，趋势强度一目了然。
公式源码（全公开，直接复制）
{新MACD 信号：金叉1~9次 底背离 顶背离 三全底}
DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIFF,9);
MACD:2*(DIFF-DEA),COLORSTICK;
STICKLINE(MACD<REF(MACD,1) AND MACD>0,0,MACD,0,0),COLORGREEN;
STICKLINE(MACD>REF(MACD,1) AND MACD<0,0,MACD,0,0),COLORMAGENTA;
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=1,21)=1;
STICKLINE(金叉,0,0.1,5,0),COLOR0000FF;
DRAWTEXT(金叉,-0.095,'金叉'),COLOR0000FF;
二金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;
STICKLINE(二金叉,0,0.15,5,0),COLORLIRED;
DRAWTEXT(二金叉,0.23,'二次金叉'),COLORLIRED;
三金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=3,28)=1;
DRAWTEXT(三金叉,0.28,'三次金叉'),COLORLIGREEN;
四金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=4,28)=1;
DRAWTEXT(四金叉,0.33,'四次金叉'),COLORCYAN;
五金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=5,33)=1;
DRAWTEXT(五金叉,0.37,'五次金叉'),COLORBLUE;
六金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=6,33)=1;
DRAWTEXT(六金叉,0.42,'六次金叉'),COLORYELLOW;
DRAWTEXT(六金叉,0.7,'黄金底'),COLORYELLOW;
七金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=7,33)=1;
DRAWTEXT(七金叉,0.47,'七次金叉'),COLORWHITE;
DRAWTEXT(七金叉,0.88,'白金底'),COLORWHITE;
八金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=8,33)=1;
DRAWTEXT(八金叉,0.57,'八次金叉'),COLORMAGENTA;
DRAWTEXT(八金叉,0.8,'钻石底'),COLORMAGENTA;
九金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=9,33)=1;
DRAWTEXT(九金叉,0.6,'九次金叉'),COLORRED;
DRAWTEXT(九金叉,0.8,'金钻底'),COLORRED;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背离:=(REF(L,A1+1)>L OR REF(C,A1+1)>C) AND CROSS(DIFF,DEA);
STICKLINE(底背离,0,-0.1,5,0),COLORRED;
DRAWTEXT(底背离,DEA,'底背离')COLORRED;
DRAWLINE(A1=0,DEA,底背离,DEA,0),COLOR0000FF,LINETHICK3;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
顶背离:=(REF(C,A2+1)<C OR REF(H,A2+1)<H) AND CROSS(DEA,DIFF);
DRAWLINE(A2=0,DEA,顶背离,DEA,0),COLORGREEN,LINETHICK3;
STICKLINE(顶背离,0,0.1,5,0),COLORGREEN;
DRAWTEXT(顶背离,DEA,'顶背离')COLORGREEN;
DRAWTEXT(CROSS(DIFF,DEA) AND 二金叉 AND 底背离,0.3,'三全底'),COLOR0000FF;
IF(DIFF>DEA,DIFF,DRAWNULL),COLORWHITE,LINETHICK2;
IF(DEA>REF(DEA,1) AND DIFF>DEA,DEA,DRAWNULL),COLORYELLOW,LINETHICK2;
使用说明（必看）
金叉次数：次数越高，底部越扎实。四金叉以上的信号可以重仓，一两次金叉轻仓试探。
底背离：出现底背离后不要急着买，等MACD柱子翻红再入场。
顶背离：比底背离更可靠。出现顶背离，减仓至少一半。
三全底：二次金叉+底背离同时出现，最强底部信号，可以果断进场。
注意：所有金叉信号只在DEA<0（零轴下方）时才标注，零轴上方的金叉不统计。
本文章仅供技术交流，不构成任何投资建议。
股市有风险，投资需谨慎。
